When I saw "The King of Remixes - Bally Sagoo"

Date :: 21/22-Nov-2009
Time :: 10:30PM - 4:00AM
Location :: Elevates, CenterStage Mall, Noida

Hey ya..

This was the day when i finally saw my all time favorite "Bally Sagoo" Playing live on the turntable in front of me.. it is one memorable moment I can never forget.

This Delhi born UK based DJ is known all over the globe for his work in revamping hindi music with Hip Hop.. he was one of the first's who revolutionized Hip Hop Punjabi and hindi song on all club scenes around the globe.

Some of my favorites are :
1 : Chura Liye Hein Tumnay
2 : Teri Akhiyan
3 : Gur Nalo Ishq
4 : Aapki Nazron Nay
5 : Noorie
6 : Tum Bin Jiya Udas
7 : Aaja Nachlay
8 : Mera Laung Gawacha

Unfortunately one of the decks of the turntable was not working properly which was being a bad show, I hope the management fixes it soon :-), Also another thing, all the contact numbers mentioned on the "Elevates" site etc are just for show, dont ever expect any human will be answering your call. Thats what happened to me, i tried all numbers available but couldnt get through. THATS BAD PR ELEVATES !!

BALLY SAGOO ROCKED the club, he came in too late, before that there were some kids trying to give thier best on the turntables ;-) , good work by them too. But you know when it is like comparing the Bally, no one is near him... atleast for the hindi/Punju club scene.

Before i signoff, here is da pic of our gang who visited the club.. (Bally Playing at tha back)






Bally Sagoo RoX !!

Virtually D.E.A.D :: A new tagline on our FB & Orkut..

Hey Ya,

Date :: 8-Nov-2009
Time :: 11:10PM
Location :: Costa Coffee, Spice Mall, Noida

The time when Me, and 3 more friends of mine Q (Qambar), KB (Karthik Balakrishnan) , A.M (Arun Menon) were sittin and chit chattin.. talking about how did we spend our day, as it was a Sunday.

Well I told them my story, I met some old friends and it was like a lesson,I was so emotionally labile & I had a strong feeling that how disconnected we have been with the real life. We rely on FaceBook / Orkut to see how fat or how drunkard that friend is now ;).

We decided ,lets get back to real life, and declared that we are virtually dead for a while ;).. No social networking sites, we dont require new friends ;) the best we can do in life is to value those who are already ours in this confound world...

"You're alive. Do something. The directive in life, the moral imperative was so uncomplicated. It could be expressed in single words, not complete sentences. It sounded like this: Look. Listen. Choose. Act."

Barbara Hall, A Summons to New Orleans, 2000

The songs I am listening ?

Virtual consoles in RHEL4/RHEL 5

There are Five virtual consoles in Redhat enterprise Linux servers.
There are certain key combinations to be used to access the virtual console,it helps alot for troubleshooting machines.
The Key Combinations are as below:
ALT-F1 : to access installer in text mode.
ALT-F2: to access bash shell .
ALT-F3 to view log of installer.
ALT-F4: to view log of kernel messages.
ALT-F5 stdout of mke2fs and grub.
ALT-F7 : access installer in Graphical mode.

Cheerz.
@$H

Being Yourself...

I just went through this , one of my colleagues forwarded it to me after an hour long debate on topic what we call as "Living LIFE Being Yourself" ... he he .. was heavy for me though , I never prefer to be a part of any debate, the only thing I believe that makes life complete is if I have "my people" ( grrrr yea obssessive haan ;), thats wat some think though ) with me and spending time with them being myself, thats what I believe life is...
But still.. she managed to agree me to a point that people do change with new people, surroundings, with places they go and get used to it.. If you read this which is pasted in hindi, its a story of a guy who visited delhi , its cool, see how his experience goes... interesting though. ... People then start getting used to it...


Hope you like it..
Cheerz..
@$H

Creative Zen X-Fi 8GB

A long time plan to own my mp3 player, my options were as below:

- To use my cellphone for music : Naah , i own a HTC Touch, already use it alot for browsing, mails and chattin. The battery also would not support me in that cause. Rather I also believe that a cellphone shouldnt be used for music purposes to prevent the wear n tear of your device.

- The first name strikes every mind , Apple iPod... in my case, Give me a break !
Personal preference though, no offenses, it’s just that i don’t want to be limited to itunes etc to transfer and manage music on my player.

My requirements were :
1. Portable.. small.. sleek with max features possible.
2. Can be used as a pendrive, music transfer easy.
3. High Sound quality.

On doing some research, i found creative zen x-fi, it comes with a wlan model too… but asks for more money..
Creative has been a leader in the digital entertainment industry for PC and interner for quite a while now.. most of us also own the creative 2.1 speakers for PC too.. me too.. which has a top sound quality.. we all know.. and is quality for money.

X-fi means extreme fidelity which is an audio standard owned by creative , which truly makes a difference, you will experience the difference once you just use this device..
Using creative zen is extremely easy, and the quality.. the first word which will drop out of your mouth after listening to music on it will be .. WooooW… And its not only music, you can save your photographs in it and view it while travelling, slideshows etc, videos – it supports mp4, avi etc.

The earphones which comes with this powerhouse is also a creative earplug, which along would cost you about 20$ I guess , approx.

To see the details of this powerhouse click the below link
http://in.creative.com/products/product.asp?category=213&subcategory=214&product=17810
Now about the cost, dude creative products are seriously expensive in india, if you have some contacts in US, call them now !

I sent this requirement to a dear friend of mine (creative zen x-fi 8GB), who went to US for an assignment, and she also agreed that this was one of her best buy’s. I got this for 99$ , I also purchased the armband along with this player which I use while working out.

In India you will get this for about Rs.14,700 , so you can see the difference.

Hope this helps in deciding your next purchase .. ;)

Cheerz.. @$H

3 Doors Down - Let Me Be Myself

See this video , premiere of "Let me be myself", a beautiful song by 3 Doors Down.


Find more videos like this on 3 Doors Down

"Let Me Be Myself"

I guess i just got lost
Bein' someone else
I tried to kill the pain
Nothin ever helped
I left myself behind
Somewhere along the way
Hopin to come back around
To find myself someday

Lately i'm so tired of waiting for you
To say that it's ok, but tell me
Please, would you one time
Just let me be myself
So i can shine with my own light
Let me be myself
Would you let me be myself

I'll never find my heart
Behind someone else
I'll never see the light of day
Living in this cell
It's time to make my way
Into the world i knew
Take back all of these times
That i gave in to you

Lately i'm so tired of waiting for you
To say that it's ok, but tell me
Please, would you one time
Let me be myself
So i can shine with my own light
And let me be myself
For a while, if you don't mind
Let me be myself
So i can shine with my own light
Let me be myself

That's all i've ever wanted from this world
Is to let me be me

Please would you one time
Let me be myself
So i can shine with my own light
Let me be myself
Please would you one time
Let me be myself
So i can shine with my own light
Let me be myself
For a while, if you don't mind
Let me be myself
So i can shine with my own light
Let me be myself
Would you one time... oooh
Let me be myself
Let me be me

Ganglia across VLANs

As per my earlier article we did a default configuration of Ganglia on the network.
By default it works on Multicast, now if we have servers spread in different network segments / locations, this will not work.

To make this work we will have to use unicast for Ganglia configurations, for that follow the steps below:

On the Ganglia machines:

$ vi /etc/gmond.conf

1. Comment all entries of mcast and add an entry of host = in the udp_send_channel

/* Feel free to specify as many udp_send_channels as you like. Gmond
used to only support having a single channel */
udp_send_channel {
#mcast_join = 239.2.11.71
host = (server host)
port = 8649
}

/* You can specify as many udp_recv_channels as you like as well. */
udp_recv_channel {
#mcast_join = 239.2.11.71
port = 8649
#bind = 239.2.11.71
}

2. Restart the gmond service

/etc/init.d/gmond restart

(server host) = The host where Ganglia is hosted and which is collecting the data.

Now when you see the page on http://(server host)/ganglia

You will see the hosts coming up on the page.

Cheerz.
@$H

Migrating the default Database location of MySQL

There are some simple steps if you need to change the default location of the MySQL Database.

1. Create new data directory data for new data directory.

mkdir data
chown -R mysql:mysql data

2、Stop MySQL process

# service mysqld stop
Stopping MySQL: [ OK ]

ps -efgrep mysql to check

3、Copy /var/lib/mysql to /home/data

cp -rfp /var/lib/mysql/* /home/data

4、Backup old /etc/my.cnf to /etc/my.conf.bak

5、Edit /etc/my.cnf

find line like bellow
#datadir=/var/lib/mysql
datadir=/data

6、Backup script /etc/init.d/mysqld to /etc/init.d/mysqld.bak and edit

# vi　/etc/init.d/mysqld

#get_mysql_option mysqld datadir "/var/lib/mysql"
get_mysql_option mysqld datadir "/data"

7. Relink : ln -s /home/data /var/lib/mysql

8. Start mysqld servicce

# service mysqld start
Starting MySQL: [ OK ]

Cheerz.
@$H

Linux :: Installing & Configuring JDK on Linux

You have to install JDK, or you already have one set-up, but you want a newer version ??

Follow some simple steps below, no need to uninstall older one.

Download the package from SUN website, package name would be something like jdk-6u14-linux-x64-rpm.bin

Now change the permissions to make it executable :

chmod 755 jdk-6u14-linux-x64-rpm.bin

Then run it:
./jdk-6u14-linux-x64-rpm.bin

You will need to type yes to indicate your acceptance to their agreement and the installation will complete on its own. Unfortunately you are not yet done. Type java -version on the command line and you will see that it still points to the crappy old JVM from gcj.

You may locate the installation folder by following steps below:

Step 1:
updatedb;locate javac |grep bin

You will see an entry like this:
/usr/java/jdk1.6.0_14/bin/javac

Here /usr/java/jdk1.6.0_14 is the actual JAVA_HOME for your machine. Note this as you will need it to run the future commands.

Now run the alternatives command to instruct OS to recognize Sun's JVM.
alternatives --install /usr/bin/java java /usr/java/jdk1.6.0_14/bin/java 100
alternatives --install /usr/bin/jar jar /usr/java/jdk1.6.0_14/bin/jar 100
alternatives --install /usr/bin/javac javac /usr/java/jdk1.6.0_14/bin/javac 100

Finally you should configure alternative to use Sun's JVM as the default JVM. To do this type:
/usr/sbin/alternatives --config java

This will present you with at least 2 options. Choose the one for Sun's JVM. Similarly repeat the process for other commands.

Type java -version and you should see something like this:

java version "1.6.0_14"
Java(TM) SE Runtime Environment (build 1.6.0_14-ea-b02)
Java HotSpot(TM) Client VM (build 1.6.0_14, mixed mode, sharing)


Bingo, now you are using the latest JDK version.

Cheers
@$H

My Favs :: R.I.P MJ, The world will miss you...

Most of you, who know me and reading this, i know you will not believe but.. I still remember my school days i used to perform on MJ songs, there were 2 guys in my town who used to do it all da time, one was me and the other was my senior, who obviously was better than me in it :-(, it was the time of audio cartridges and those oversized walkmans.. which was a part of my stuff, when i used listen to MJ numbers alot....

With time, MJ slowly went of business and so as from my preferred artists list, but it was a shock to hear the news that MJ is no more...

Nothing more to say, but yes MJ, You would always be the King Of Pop !! You will always Rule and The World Will Miss You ...



R.I.P MJ.

Cheerz
@$H

Creating Files of a desired Size Linux

Greetings,

Suppose you doing some testing on the filesystem, say about quota etc, and you need to create files of a desired size, the golden command to be used is "dd".

Check out the usage as below:

$ dd if=/dev/zero of=bigfile bs=1024 count=1048576
This will create a file of size 1024 * 1048576 bytes (or 1 GB). In this command

if - input file
of - output file or the file to be created
bs - block size in bytes
count - # of blocks of size bs

Thats all for this day.

Cheerz.
Ash

Installing and configuring Ganglia

-->

Prerequisites:

· A server , say MASTER , with RHEL version installed, I used RHEL 4

· Install the below packages (rpms)

1. ganglia-web-3.0.6-1.el4

2. ganglia-3.0.6-1.el4

3. ganglia-gmond-3.0.3-1

4. ganglia-gmetad-3.0.6-1.el4

Scenario:

We will setup a basic architechture, Though I had finally worked on a multi tier architecture of it. Incase any issue please feel free to post, maybe I can be of any help.

Configurations on Master:

Once you install the above packages, you need to run the below commands to start the services. Once started you can check by opening http://master/ganglia

$/etc/init.d/gmetad start

$/etc/init.d/httpd start

$ vi /etc/gmond.conf

You can mention the name of the cluster being monitored as below:

/* If a cluster attribute is specified, then all gmond hosts are wrapped inside

* of a tag. If you do not specify a cluster tag, then all will

* NOT be wrapped inside of a tag. */

cluster {

name = "Test Cluster"

owner = "My Team"

}

$ /etc/init.d/gmond start

-->

Configuration on cluster hosts:

For cluster hosts to send data to the master, you need to install gmond clients on all of the hosts.

Once you install the clients , you have to edit the /etc/gmond.conf file for pointing these hosts to update MASTER with the status. Please see below:

$ rpm –ivh ganglia-gmond-3.0.3-1.rpm

$ vi /etc/gmond.conf

/* If a cluster attribute is specified, then all gmond hosts are wrapped inside

* of a tag. If you do not specify a cluster tag, then all wi

ll

* NOT be wrapped inside of a tag. */

cluster {

name = "Test Cluster"

owner = "My Team"

latlong = "unspecified"

url = "unspecified"

}

The other change is for specifying the udp_SEND_channels

/* Feel free to specify as many udp_send_channels as you like. Gmond

used to only support having a single channel */

udp_send_channel {

# mcast_join = 239.2.11.71

host = (Master IP)

port = 8649

}

Now once you are done with all the configurations , you just need to wait for a while, it takes some time for the master to fetch the data and then create RRDs (graphs) for the hosts.

Then open http://master/ganglia and there you go, you are now monitoring your hosts with ganglia.

Happy Monitoring, enjoy

Cheerz.

Ash

Linux Performance Testing Commands

Some basics, I use while checking the health of the Linux Box , whenever in a trap.

$top - overall UT of the machine
$mpstat - display utilization of each CPU individually
$mpstat -P ALL

$sar - todays cpu activity
$sar -u 2 5 : todays cpu activity ,comaprison of cpu 2 seconds apart.. 5 times
$sar -o output.file 12 8 >/dev/null 2>&1 & - redirect output to file
$sar -f data.file - read file

$ps -eo pcpu,pid,user,args | sort -k 1 -r | head -10 : who is monopolizing or eating the CPUs
$ps -eo pcpu,pid,user,args | sort -r -k1 | less : who is monopolizing or eating the CPUs

iostat : avg cpu ut since last reboot
$iostat -xtc 5 3 : You may want to use following command, which gives you three outputs every 5 seconds (as previous command gives information since the last reboot)


Monitoring Disk utilisation:


Display 3 reports of extended statistics at 5 second intervals for disk type the following command:
$ iostat -d -x 5 3

$iostat -d -x interval count

-d : Display the device utilization report (d == disk)
-x : Display extended statistics including disk utilization

interval : It is time period in seconds between two samples . iostat 2 will give data at each 2 seconds interval.
count : It is the number of times the data is needed . iostat 2 5 will give data at 2 seconds interval 5 times

Will add more to it sooon.....

Keep reading..

Cheerz
@$H

Yum Error

I struggled a long time doing lotsa googling and opening up books to get hold of this error.

I faced this error while using YUM in some versions of linux, the error looks as below:

Traceback (most recent call last):
File "/usr/bin/yum", line 6, in ?
import yummain
File "/usr/share/yum-cli/yummain.py", line 23, in ?
import yum
ImportError: No module named yum

Now after lots of search i managed to find the reason and a workaround for it:

This error is caused because yum installs the python modules in: /usr/lib/python2.3/site-packages and some versions of RHEL uses python2.2.

To make yum work we only have to tell python to search for modules in this new directory using the variable PYTHONPATH.

I just did: (ofcourse here i am using bash shell)
#export PYTHONPATH=/usr/lib/python2.3/site-packages
And then used the yum command
#yum list all

booom.. here it worked like magic.. so thats my take on this error if you have any suggestions on this please feel free to post.

Cheerz.
Ash

Gadgets :: HTC Touch - Must Have Programs

Hi,

I own a HTC Touch and have been using it for quite a while now. Have done alot of R&D on it and resetted it many times ;-). But yea neva lost my data coz always used to sync it with data on my lappy.

• First of all you made a wrong investment purchasing a HTC Touch if you dont have a GPRS/mobile office etc etc enabled on your Phone connection, please change your phone, buy a typical Nokia :-)
• I am an Airtel fan, same number , same service since last 7 years approx.
  

My feedback for HTC Touch :

Pros

• I simply love it, adore it, one of my best investments :-).
• Sleek , trendy, light though abit low on memory (mine is an older model 64MB / 128MB).
• Nice wide screen.
• Very competitive in price.
• TouchFlo works very well on cubes.
• Mine has Windows mobile 6, alot of resources available on internet for it.
• Easy to configure mails, access websites etc etc.
• Chat clients available for free ( gtalk,yahoo,msn,aol,facebook etc etc)
• Easy to use as wireless modem (using bluetooth).

Cons

• Nothing bad about it :-P
• Hard to find accessories for this phone.
• The screen protector available alongwith the phone in box is of bad quality, better buy new one (chinese :-) ).
• Very sophisticated, handle with care, more than your GF / BF :-). I paid a price of 4k for getting the screen changed when i broke it..
• Battery Backup :-( , specially when using Wi-Fi.
• Excuse me , its not a music phone, dont expect sony ericsson / nokia types sound quality. Also no radio available.
  

So here are some programs i suggest you for a must have on your HTC :

• Advance Config (configurations for your mobile at a glance)
  
• Palringo (Chat Client)
• ClearTemp (To clear all temps, on all locations)
  
• WinXplore (Shortcut to view folders within windows directory)
  
• Total Commander (Nice file browser, also helps in editing registry for tweaks,reverse engineering ;-) )

I hope you find this article useful, I would come up with another article on HTC soon.

Have Fun and Keep Rocking !!

Ash

/dev/null Permission Denied Error

This was a problem i faced and found that /dev/null is is not a charector devide. This is causing failure for all messages which are directed to /dev/null.

$ cat ash > /dev/null
/dev/null: Permission denied.

$ ls -l /dev/null
-rw-r--r-- 1 root root 0 Aug 9 11:22 /dev/null


Solution:
The problem seems to be with the permissions of the /dev/null. This seems to be read only at the moment for you. Check this by logging in as root and listing it with the command:

ls -l /dev/null

You should see this if everything is correctly set:
crw-rw-rw- 1 root root 1, 3

If you get a different set of permissions like this maybe:
-rw-r--r-- 1 root root 1, 3

then you should (as root) delete the /dev/null with:
rm /dev/null

and recreate it (as root) again with:
mknod -m 0666 /dev/null c 1 3

(The device number according to the Kernel source in the documentation under Documentation/devices.txt supposed to be Major=1 und Minor=3)

Now, list the /dev/null again and you should see the permissions as above. Hope this helps & it worked for me..

Configure bonding on Linux !

Hello All,

This would be my first technical article in da blogging world.

We would talk about configuring bond interfaces on linux hosts (Tested on RedHat Enterprise Linux 3 & 4), these are used in case of configuring network failover interfaces on linux.

Prerequisites:

• Connect network cables on both eth0 and eth1.
• Try to work on console for this, as you may need to do a network restart and if anything goes wrong you would not be able to login again on the host.

Its very simple to configure by just following the below steps :

Step 1: Edit the file /etc/modules.conf

Add the below two lines in the end.

alias bond0 bonding
options bonding miimon=100 mode=1

Step 2: Edit the /etc/sysconfig/network-scripts/ifcfg-ethX configuration file for both eth0 and eth1 so that the files show identical contents. For example:

For ifcfg-eth0 :

DEVICE=eth0
USERCTL=no
ONBOOT=yes
MASTER=bond0
SLAVE=yes
BOOTPROTO=none

For ifcfg-eth1 :

DEVICE=eth1
USERCTL=no
ONBOOT=yes
MASTER=bond0
SLAVE=yes
BOOTPROTO=none


Step 3. Now we will create a network script for the bonding device naming it /etc/sysconfig/network-scripts/ifcfg-bond0 , which would appear like the following example:

DEVICE=bond0
USERCTL=no
ONBOOT=yes
NETWORK=(Network IP)
NETMASK=(Subnet Mask)
GATEWAY=(Gateway IP)
IPADDR=(IP Address)


Step 4. /etc/init.d/network restart

Now you may test by giving a command "ifconfig -a" on terminal, you will say bond0 available alongwith the two slaves eth0 & eth1.

My First Blog !!

Hmmmm its time !

I have been thinking about this for a long time now but now i think its the time to start.
Well my reason of this would be a selfish one though ;-) just to record my learnings , my experience and to use it as reference if required ( I have a short memory problem he he he ).

Also i think... i said "i think" it may also be helpful for others who is seeking any info i have mentioned here.. now if you are reading the lines carefully, you muzz be thinking why I stressed on "I think" well its because i believe in one rule " Be humble, there are greater people around you.. LET'S LEARN " ..

Okie now cutting it short... Hope you have a nice time going through this blog and it may be helpful for you.

Dont forget to comment if you like anything inhere..

Cheerz and Njoi your stay here !

Ash Sethi